How To Unblock Drain Pump On Washing Machine In Cumbria

At Drainage Cumbria, we understand the frustration that comes with a blocked drain pump on your washing machine. Not only can it cause water to overflow, but it can also prevent your washing machine from functioning properly. Fortunately, we have put together a guide to help you unblock the drain pump on your washing machine in Cumbria.

What Is A Drain Pump?

A drain pump is an essential component of a washing machine that helps to pump out water from the machine. It is responsible for ejecting water out through the drain hose during the process of washing and rinsing. When the drain pump is blocked, the flow of water is restricted, and the water inside the machine cannot be emptied.

Signs Your Drain Pump Is Blocked

If you notice any of the following signs, it indicates that your drain pump is blocked:

• Water is not draining from the washing machine
• The machine is making unusual noises
• The machine is leaking water
• The machine is stopping mid-cycle

Steps To Unblock Drain Pump on Your Washing Machine

Here are the steps to follow to unblock the drain pump on your washing machine:

Step 1: Switch Off The Washing Machine

Before you begin to unblock the drain pump, it's essential to ensure that the washing machine is switched off and unplugged from the power source. This will protect you from electric shock and keep you safe during the process.

Step 2: Empty The Water

The next step is to empty the water from the washing machine. You can do this in two ways by using a hose to drain out the water or by using a bucket to scoop out the water. If there is a vent in your drain hose, open it to release the water.

Step 3: Locate The Drain Hose

Locate the drain hose at the back of the washing machine. The drain hose is usually situated at the bottom of the machine and may be attached to the drain pump.

Step 4: Remove The Drain Hose

Once you have located the drain hose, detach it from the washing machine. You can use pliers or a wrench to loosen the hose clamp and pull the hose out of the machine.

Step 5: Check The Drain Hose

Inspect the drain hose for any blockages. Use a torchlight to illuminate the inside of the hose and check for any foreign objects such as coins, hair, or lint. Remove any blockages that you find.

Step 6: Check The Drain Pump

Find the drain pump it's usually located near the drain hose. Check the drain pump for any blockages, and carefully remove any foreign objects that you find using a pair of tweezers or pliers. Be very careful not to damage the pump while removing any blockages.

Step 7: Reattach The Drain Hose

Once you have removed any blockages, reattach the drain hose to the washing machine. Ensure that the hose clamp is securely fastened.

Step 8: Test The Washing Machine

After you have completed all the steps above, test the washing machine to ensure that the drain pump is unblocked. Run a test programme to check if the water is draining correctly. If you find that the problem persists, you may need to call in a trusted professional like Drainage Cumbria for further assistance.

Conclusion

Unblocking a drain pump on your washing machine in Cumbria may seem like a daunting task, but with our simple guide, you can do it yourself. However, if you run into any difficulties or you're unsure of what to do, do not hesitate to contact us at Drainage Cumbria. Our team of experts is always on standby to help you with any drain-related issues.

Call us today on 01228 734162 and let us help you get your washing machine running smoothly again.