How To Unblock Washing Machine Drain Pipe In Cumbria

As a homeowner in Cumbria, it's common to experience a blocked washing machine drain pipe. This can be frustrating, especially if you don't know how to fix the issue. Not to worry, Drainage Cumbria are here to help. We are a drain unblocking company based in Cumbria, North West England. If you need any assistance with unblocking your washing machine drain pipe, don't hesitate to give us a call on 01228 734162 or send us an email at [email protected]. In this article, we will discuss the necessary steps to unblock your washing machine drain pipe.

Water Programme

Before you begin, make sure you have disconnected the power supply to the washing machine. This is important to prevent any electric shocks or damage to the washing machine.

Drain Pump

Next, locate the drain pump. It is usually located at the bottom of the washing machine. If you're unsure about the location, refer to the washing machine manual.

Need to Select Access Hatch

Once you have located the drain pump, you will need to select the access hatch. This hatch can usually be removed by sliding or twisting it. Make sure you have a towel nearby to catch any water that may spill out.

Test

Check if there is any water in the drain pump. If there is water present, take a bucket and place it under the pump. Remove the access hatch and let the water drain into the bucket. Be careful, as the water might be dirty and can stain your clothes. Make sure you dispose of the water properly.

Sometimes Hose

Once you have emptied the water from the drain pump, you will need to detach the hose that leads to it. Sometimes, this hose may be difficult to remove. If you're struggling, try using pliers or a wrench to loosen it.

Water Washing

After detaching the hose, run some water through it. This will help to flush out any debris in the hose. Be sure to do this outside or in a sink to avoid making a mess.

Washing Machine

With the hose still detached, run a washing machine cycle. Let it run for a few minutes before stopping it. This will help to dislodge any debris in the washing machine's drain pipe.

Drain Soap Residue

Reattach the hose to the drain pump and remove any soap residue from the pump. This can be done using a cloth or a brush. It's important to remove any residue, as it can cause blockages in the future.

Waste Pipe

Finally, reattach the access hatch and run another washing machine cycle. This will help to flush out any debris that may still be present in the waste pipe.

Conclusion

Unblocking your washing machine drain pipe is not as difficult as it may seem. With the steps outlined above, you will be able to unblock the drain pipe in no time. If you're still experiencing issues, do not hesitate to give Drainage Cumbria a call on 01228 734162. As a reputable drain unblocking company based in Cumbria, we will be able to provide expert advice and assistance. You can also visit our website at drainagecumbria.uk for more information about our services.