How To Unblock Wet Room Shower Drain In Cumbria

Drainage Cumbria are a drain unblocking company that provides quality services to residents of Cumbria and its environs. They have been in operation for a significant period and have earned an excellent reputation for their outstanding services. Blocked drains are a common problem in homes, and the shower drain is no exception. Fortunately, in this article, we will be discussing how to unblock wet room shower drains in Cumbria using accessible and cost-effective methods.

What Causes Shower Drain Blockage?

Blocked shower drains are usually caused by the collection of hair and soap scum over time. If not removed, these particles can form a blockage in the drainage system, causing water to accumulate and eventually overflow. In some situations, a blocked shower drain could point to a more severe drainage problem, and it is advisable to contact a professional Drainage Cumbria plumber to carry out a thorough investigation and fix the issue.

Tools Needed

Before you start unclogging your shower drain, here are some tools you will need:

• A plunger
• A wet/dry vacuum cleaner
• A pair of gloves
• A bucket
• Baking soda
• Vinegar
• Boiling water
• Drain snake (optional)

1. Plunger Method

Step 1: Partially Fill The Shower Base With Water

Before using a plunger, fill the shower base with enough water to cover the plunger's bell. Water helps to create a vacuum seal, making it easier to perform the plunging action.

Step 2: Create A Seal

Place the plunger over the shower drain, ensuring that the bell covers the entire opening. Use your other hand to hold the plunger handle firmly.

Step 3: Plunge

Move the plunger up and down in a rapid motion, applying sufficient force to dislodge any clogged materials from the drain pipe. Repeat this for several minutes until water begins to drain slowly.

Step 4: Clean Up

Remove the plunger and debris that may be floating in the shower base.

Step 5: Test Drainage

Turn on the shower and allow water to drain to check if all clogs have been cleared. If the drainage is slow, repeat the plunging process.

2. Wet/Dry Vacuum Method

Step 1: Set The Vacuum Cleaner To Wet Mode

It is essential to set the vacuum cleaner to wet mode before use.

Step 2: Create A Seal

As with the plunger method, create a tight seal over the shower drain with the vacuum cleaner hose.

Step 3: Turn On The Vacuum Cleaner

Turn the vacuum cleaner on and allow it to run for about two to three minutes. The vacuum will suck up any water and debris from the drain.

Step 4: Test Drainage

After cleaning the drain, turn on the shower to check if the water flows smoothly.

3. Baking Soda And Vinegar Method

Step 1: Pour Baking Soda Into The Shower Drain

Begin by pouring about a cup of baking soda down the shower drain. Baking soda helps to break down any hair or scum in the drain pipe.

Step 2: Pour Vinegar Into The Drain

Pour about a cup of vinegar over the baking soda. The combination of both ingredients will create a chemical reaction that will help break down any materials clogging the drain.

Step 3: Wait

Allow the mixture to sit for about an hour. During this time, it will continue to break down any materials blocking the drain.

Step 4: Pour Boiling Water

After an hour, pour boiling water slowly into the shower drain. The hot water will help to flush out any materials that were softened by the mixture of vinegar and baking soda.

Step 5: Test Drainage

Turn on the shower to check if the water flows smoothly. If water flow is still slow or blocked, repeat the process.

4. Drain Snake Method

A drain snake is a long and flexible metal wire with a corkscrew tip at one end. It is used to clear blocked pipes and can be an effective tool if other methods have failed.

Step 1: Insert The Drain Snake Into The Shower Drain

Insert the drain snake into the shower drain, turning it in a clockwise motion. When the snake encounters any obstructions, continue to turn it, pushing it further down the drain, thereby dislodging the obstruction.

Step 2: Retract The Drain Snake

Slowly retract the snake, removing any debris that may have been dislodged from the drain.

Step 3: Test Drainage

Turn on the shower to check if the water flows smoothly. If the water flow is still slow, consider combining any of the other methods listed above with the drain snake method.

Conclusion

Blocked shower drains can be frustrating, but there are several DIY tricks you can do to unclog the drainage system without calling a professional. The methods outlined above should help you clear most blockages. However, if the drain is still blocked, Drainage Cumbria, a trusted drain unblocking company in Cumbria, is just a phone call away. Contact them on 01228 734162 or visit their website at drainagecumbria.uk to explore all the services they have to offer.