Using a Plunger to Remove Your Blockage

One of the most common tools that homeowners use to remove bathtub blockages is a plunger. It's an inexpensive tool that can work wonders if used correctly. Here's how to use a plunger to remove your bathtub blockage:

1. Fill your bathtub to cover the plunger head.
2. Place the plunger over the blocked drain, ensuring that it creates a tight seal.
3. Push down on the plunger using a steady and consistent motion.
4. Repeat steps 2 and 3 until the blockage clears.

When to Consider Calling a Professional

If using a plunger does not unclog your bath, it's time to consider calling in the pros at Drainage Cumbria. It's essential to identify the cause of the blockage before attempting any solutions, to avoid causing additional damage to your bathtub or pipes.

Common Causes of Bathtub Blockages

Bathtub blockages are commonly caused by:

1. Hair: Hair is the most common cause of bathtub blockages since it can quickly accumulate in the drain when mixed with soap and oils.
2. Soap and body oils: When these combine with hair, they can create a thick and stubborn blockage in your bathtub.
3. Mineral Buildup: Naturally occurring minerals in your water supply can build up over time, causing blockages.

How to Prevent Future Blockages

Prevention is always better than cure. Here are some steps you can take to prevent future bathtub blockages:

1. Install a drain strainer or filter to catch hair and other debris.
2. Regularly clean your bathtub to remove any soap or body oils.
3. Consider using a drain cleaner that's specifically designed to remove hair and debris.
4. Avoid pouring anything down your drain that can cause blockages, such as cooking fats, oils, or solid waste.