Step 2: Remove the Blockage

Once our experts identify the cause and location of the blockage, they will take the appropriate steps to remove it. We use various tools to remove the blockages, such as a plunger, snake, or hydro jet. Our team is equipped with the latest technology to ensure maximum effectiveness in removing the blockage.

Step 3: Water Test

After removing the blockage, we conduct a water test to confirm that the bathtub is draining correctly. We run water in your bathtub and check for any signs of blockage or drainage issues.

Step 4: Cleanup

Our team will clean up the area around your bathtub, ensuring that any debris or dirt is removed from the drainpipes.

Using a Plunger to Unblock a Blocked Bath in Sandwith Newtown

A plunger is a tool used to remove blockages by pushing and pulling water through the drainpipes. It is essential to know how to use a plunger correctly to unblock a blocked bathtub. Here are the steps to follow:

1. Fill the bathtub with water - the water level should be sufficient to cover the plunger's suction cup.
2. Insert the plunger into the drainpipe, making sure that there is a good seal around the drain.
3. Push down and pull up on the plunger rapidly for about 10 to 15 seconds.
4. Release the plunger, and water should start to drain from the bathtub. If the water does not drain correctly, repeat the process.

Note: A plunger should not be used if you have already tried using chemicals to unblock your bathtub. Chemicals can damage the plunger's rubber seal, rendering it ineffective.