How Do You Clear A Blocked Sink In Cumbria: Expert Tips from Drainage Cumbria

If you are encountering a blocked sink in Cumbria, you might feel the need to call a plumbing professional. But before you do that, you might try to unclog the sink by yourself. It can save not only time but also money. In this article, Drainage Cumbria, a blocked sink company in Cumbria, will provide expert tips on how to clear a blocked sink.

Introduction to Drainage Cumbria

Drainage Cumbria is a specialised drainage company that provides quality services in Cumbria and surrounding areas. Our team of experts is fully certified and equipped with the latest technology and tools to make sure that our services are timely, reliable and top-notch. Our phone number is 01228 734162, and you can also contact us via email at [email protected]. Our website is drainagecumbria.uk.

How To Clear A Blocked Sink

A blocked sink can be frustrating and inconvenient, but it is a common problem that can be fixed easily. By knowing how to clear the blockage, you can save money on a plumber and get your sink working efficiently again. Here are a few tips from Drainage Cumbria:

Step 1: Turn off the water supply

Before fixing a blocked sink, make sure to turn off the water supply. This will prevent any water from overflowing and making the problem worse. You can do this by turning off the valve under the sink.

Step 2: Remove any standing water

Take a cup or a bowl and remove as much standing water as possible. If there is a lot of water, you can use a bucket to remove it. This will make the sink easier to clean.

Step 3: Check the plughole

The plughole is where the water drains out of the sink. It can get blocked by hair, soap residue or other debris. Check if there is anything clogging it and try to remove it using a pair of gloves or a tissue. If you can't remove the blockage, move on to the next step.

Step 4: Use a plunger

A plunger is a useful tool for unclogging a sink. Place the plunger over the plughole and make sure it covers it completely. Fill the sink with enough water to create a seal around the plunger. Then, pump the plunger up and down forcefully for a few minutes. This should create suction and remove the blockage.

Step 5: Try a drain cleaner

If the blockage is persistent, you can try using a drain cleaner. Make sure to follow the instructions on the product carefully, and wear gloves and safety goggles. Pour the solution down the plughole and wait for the recommended time. Then, flush the sink with hot water to remove any residue.

Step 6: Call a professional

If none of these methods work, it's time to call a professional. Drainage Cumbria is here to help. Our team of experts will come to your location and solve the problem in no time. You can count on us for quality, timely and reliable service.

Preventing Sink Blockages

Prevention is key when it comes to sink blockages. Here are a few tips from Drainage Cumbria:

• Avoid pouring grease, oil or fat down the sink
• Use a drain cover or a strainer to avoid hair or debris from going down the plughole
• Run hot water down the sink regularly to prevent accumulation of soap residue
• Do not use harsh chemicals to clean the sink as they can damage the pipes

Conclusion

Clearing a blocked sink in Cumbria can be done with a little effort and the right tools. By following the tips from Drainage Cumbria provided above, you can save money and time while getting your sink working again. Remember to turn off the water supply, remove any standing water, check the plughole, use a plunger or drain cleaner, and call a professional if needed. Prevention is also key to avoiding sink blockages. We hope this article has been helpful. If you need further assistance, don't hesitate to contact us at Drainage Cumbria.