How to Clear Blocked Bathroom Sink in Cumbria

Are you facing the problem of a blocked bathroom sink in Cumbria? If yes, then you are not alone. Blocked sinks are a common problem in bathrooms and can be caused due to various reasons such as hair, soap, toothpaste, and more. If left untreated, they can cause serious damage to your entire drainage system, which can be costly to fix.

However, you don't need to worry as Drainage Cumbria is here to help you. As a leading drainage company in Cumbria, we have years of experience in providing the best solutions for blocked sinks. In this article, we will guide you on how to clear a blocked bathroom sink in Cumbria. So, let's get started!

Water - The Basic Element

Water is the essential element to clear a blocked bathroom sink. It is the most basic and straightforward step to try before moving onto more advanced methods. Run hot water into the sink for a few minutes and check if it helps to clear the blockage. The hot water helps to dissolve the substances in the sink that cause the blockage. For best results, run hot water into the sink for a few minutes daily to prevent future blockages.

Drain - Your Sink's Partner

The drain is another vital element to clear a blocked bathroom sink. In most cases, the blockage occurs in the drainpipe below the sink. You can use a plunger to try and clear the blockage. Place the plunger over the plughole and create a seal. Push the plunger in and out with force to create pressure and suction that can clear the blockage.

Sink - The Culprit

The sink itself can also cause a blockage. You need to check for any debris or gunk that may have accumulated in the sink. Remove the sink stopper and use a thin, flexible wire to reach into the sink and remove any debris. You can also use a small brush to clean the sink thoroughly.

Using Chemicals - A Risky Endeavor

Many people use chemicals to clear blocked sinks, but it is not recommended. The chemicals can corrode your pipes, and the fumes can be harmful to you and your family. If you want to try chemicals, then make sure to follow the instructions carefully and wear protective gear.

Remove the Blockage - Step by Step

If none of the above methods work, then you can try to remove the blockage manually. Follow the instructions below to remove the blockage:

Step 1 - Turn off the water supply under the sink.

Step 2 - Place a bucket under the sink to catch any water that spills out.

Step 3 - Loosen the nuts on the trap with a wrench and carefully remove the trap.

Step 4 - Use a plumbing snake to push any debris through the drain.

Step 5 - Use a brush to clean the trap thoroughly.

Step 6 - Reattach the trap, tighten the nuts, and turn on the water.

If you are not comfortable removing the trap, then it is best to call a professional drainage company like Drainage Cumbria.

Bathroom Cup - A Quick Fix

If you need a quick fix for a blocked bathroom sink, you can try using a bathroom cup. Fill the cup with warm water and place it over the plughole to create a seal. Now, push and pull the cup rapidly to create suction that can clear the blockage. This method works well for small blockages, but it may not work for more severe blockages.

Conclusion

Blocked sinks can be frustrating, but they are not impossible to clear. Drainage Cumbria is here to help you clear blocked bathroom sinks in Cumbria. We have the experience and tools to get your sink running smoothly again. Whether you need a quick fix or a full-scale drainage system repair, we've got you covered.

Call us today at 01228 734162 or email us at [email protected]. You can also visit our website at drainagecumbria.uk for more information on our services. Don't let a blocked sink ruin your day, call Drainage Cumbria today!