If you are in Cumbria and you are experiencing a blockage in your toilet, then you are not alone. Blocked toilets are a common problem in the area and can be caused by a variety of reasons. Regardless of the cause, a blocked toilet can be a frustrating and unpleasant experience that requires immediate attention.
At Drainage Cumbria, we have years of experience in dealing with blocked toilets in the area. In this guide, we will discuss the main causes of blocked toilets, the tools and equipment needed to clean a blocked toilet, and the steps that you can take to clean a blocked toilet yourself.
There are many reasons why a toilet can become blocked. Some of the most common causes include:
One of the most common reasons for a blocked toilet is flushing the wrong items down the toilet. These items include non-flushable items such as baby wipes, feminine hygiene products, and paper towels. They can easily get stuck in the plumbing and cause a blockage.
Another common cause of a blocked toilet is low water flow or pressure. This can prevent the waste from being flushed away properly and can cause a blockage in the plumbing.
If you have used plumbers snakes or augers to unclog your toilet, you may have damaged the plumbing, causing a blockage.
If there is not enough water in the bowl, it can become difficult to flush the toilet properly, and this can cause a blockage.
To clean a blocked toilet in Cumbria, you will need the following tools and equipment:
A plunger is a simple tool that can help you unblock your toilet. It creates suction that can help to remove the blockage from the pipes.
An auger is a tool that can be used to remove blockages from the toilet drain pipe. It is a long, flexible wire that can be fed into the drain to remove the blockage.
Soap can be a useful tool in unblocking a toilet. It can help to lubricate the pipes and make it easier to remove the blockage.
Baking soda and vinegar can be used to create a chemical reaction that can help to dissolve the blockage in the pipes.
Put on rubber gloves and protective eyewear to protect your hands and eyes from the bacteria and germs found in the toilet.
Use a plunger to create suction and remove the blockage from the pipes. If the blockage is difficult to remove, use an auger to remove the blockage.
If the plunger and auger are not effective, try adding a small amount of soap to the toilet bowl. This can help to lubricate the pipes and make it easier to remove the blockage.
If the blockage still persists, try using a baking soda and vinegar solution. Mix a cup of baking soda and a cup of vinegar and pour it into the toilet bowl. Let the solution sit for a few minutes, and then flush the toilet to see if the blockage has been removed.
If you cannot remove the blockage yourself, contact Drainage Cumbria for assistance. Our experienced technicians can quickly and efficiently remove the blockage and get your toilet back to normal.
If you are in Cumbria and you have a blocked toilet, then contact Drainage Cumbria for assistance. Our experienced technicians are available 24/7 to help you with any plumbing problems you may have. Contact us today at 01228 734162 or email us at [email protected]. Visit our website at drainagecumbria.uk to learn more about our services.