What To Do Toilet Blocked In Cumbria

Are you experiencing a blocked toilet in Cumbria? This can be frustrating, and sometimes it can be an urgent problem that needs to be resolved as quickly as possible. Luckily, Drainage Cumbria is a blocked toilets company in Cumbria that can help you with the issue.

The Toilet Plunger

The toilet plunger is the most commonly used tool for unclogging a blocked toilet. It is a simple and effective tool that can usually solve the problem with just a few plunges. Here are the steps to use a plunger:

1. Make sure there is enough water in the toilet bowl to cover the bottom half of the plunger.
2. Place the plunger over the toilet drain and push down gently until it forms a suction seal.
3. Plunge up and down vigorously for about 20 seconds.
4. Check to see if the water in the bowl has started to drain. If not, repeat the process until the clog is cleared.

The Water & Drain Valve

If the plunger doesn't work, your next step is to turn off the water supply to the toilet before attempting to clear the clog. The water valve is usually located near the base of the toilet. Turn the valve clockwise until it stops, and this will stop the flow of water to the clogged toilet.

Next, you should also locate the drain valve, which is usually located behind the toilet. This is the valve that controls the flow of waste water from the toilet to the drain pipes. The drain valve may be slightly more difficult to locate, but it is usually a knob or lever at the base of the toilet.

The Rubber Auger

If the plunger and valve methods have failed, you can try using a rubber auger. This tool is commonly used by professionals but is available to purchase from hardware stores. Here is how to use it:

1. Insert the rubber auger into the toilet bowl, ensuring it is fully inserted.
2. Turn the handle of the auger clockwise until you feel resistance.
3. Continue to turn the handle, while pushing the rubber auger in and out of the drain.
4. Withdraw the auger slowly to avoid splashing water from the toilet.

The Towels Method

If you don't have a plunger or rubber auger and the blocked toilet is urgent. You can try the towels method:

1. Get several towels and place them on the floor.
2. Wear gloves, scoop out as much water from the toilet bowl as possible and dispose of it in a bucket, being careful not to splash the water.
3. Use a sturdy wire coat hanger and unbend it, creating a long wire.
4. Insert the wire into the toilet bowl, pushing it gently but firmly through the drain. Be sure to avoid any resistance or stops and push until you can't push any further.
5. Start pulling the toilet blocking material out of the pipe.
6. Keep pulling until the blockage clears.

Protect Your Toilet From Blockages

Prevention is better than cure, and there are several ways you can protect your toilet from blockages:

• Do not flush any unnecessary items such as sanitary products or wipes.
• Use only the appropriate amount of toilet paper.
• Regularly clean your toilet, ensuring no residue is left in the bowl.
• Avoid pouring anything, including cooking oil and coffee grounds, down the drain.

Conclusion

A blocked toilet can be a frustrating problem, but it is usually straightforward to resolve. Drainage Cumbria is always here to offer professional, efficient and affordable services to solve all plumbing issues, including blocked toilets. If you need assistance, please do not hesitate to contact us on 01228 734162 or email us at [email protected]. You can also learn more about us and our services by visiting our website at drainagecumbria.uk.