How To Clear A Blocked Macerator Toilet In Cumbria

Are you living in Cumbria, North West England, and facing issues with your macerator toilet? A blocked macerator toilet can be frustrating and can cause inconvenience in your daily life. But don't worry, as Drainage Cumbria, a blocked toilets company in Cumbria, is here to help you clear your blocked macerator toilet. In this landing page, we will guide you on how to clear a blocked macerator toilet, the components involved in it, and what steps you can take to prevent future blockages.

Understanding Macerator Toilets

Macerator toilets are similar to traditional toilets, but they require additional components to function efficiently. A macerator unit is fitted behind the toilet, where it grinds waste material into smaller particles before pumping it through the pipes. Water pressure helps the pump push the material through the pipes and into the main waste system.

Macerator toilets have a microswitch attached to them, which operates the motor and the pump to flush away waste material from the toilet. A macerator tank collects water from the toilet, which flows into the macerator unit. The water then activates the motor and the pump, which pumps the waste material into the pipes.

Identifying Blockages

Blockages in macerator toilets can occur due to a variety of reasons, such as flushing improper items down the toilet, inadequate water pressure, or a lack of maintenance. A common cause of blockages is flushing non-biodegradable materials, such as sanitary products, cotton wool, wipes, and nappies, which can clog up the pipes over time.

If you notice that your toilet is slow to drain, emits bad odours or strange noises, it could indicate that your macerator toilet is blocked. You may also notice water backing up into the toilet bowl or overflowing onto the floor.

Clearing the Blockage

If you notice that your macerator toilet is blocked, here are some steps you can take to clear the blockage:

Step 1: Turn off the Power Supply

The first thing you need to do is turn off the power supply to the macerator unit. Most macerator units have a switch or fuse box, which you can turn off to disconnect the power supply.

Step 2: Locate the Motor Unit

Locate the motor unit, which is usually located behind the toilet or in a nearby cupboard. The motor unit contains the macerator pump and the foam trap, which filters materials and prevents any solids from passing through the pump.

Step 3: Remove the Motor Unit

Remove the motor unit by disconnecting the waste and supply pipes. Ensure that you place towels or rags beneath the unit to catch any residual water or waste material that might spill out.

Step 4: Check for Blockages

Check for blockages in the motor unit by examining the rubber seals, foam trap, or blades. Use a long instrument, such as a coat hanger, to manually remove any visible blockages.

Step 5: Reassemble the Motor Unit

After checking for any blockages, reassemble the motor unit and ensure that all the connections are secure. Turn on the power supply and flush the toilet to test if the blockage has been cleared.

When to Replace the Macerator Toilet

If you encounter persistent problems or notice that your macerator toilet requires frequent unblocking, it may be a sign that you need to replace it. Old or faulty macerator units can be challenging to repair and may require complete replacement to fix the problem. It's best to consult with a professional macerator toilet installer or specialist at Drainage Cumbria to help you determine if a replacement is necessary.

Preventing Future Blockages

To prevent future blockages, here are some preventative measures you can take:

• Throw non-biodegradable materials in the waste bin instead of flushing them down the toilet.

• Use toilet paper that dissolves quickly and easily to reduce the chances of blockages.

• Regularly clean the macerator unit, including the rubber seals, foam trap, and blades, to prevent dirt or waste material from building up.

• Ensure that the macerator unit is installed correctly by a professional and that it receives maintenance checks at regular intervals.

Contact Drainage Cumbria

If you require assistance in clearing a blocked macerator toilet, contact Drainage Cumbria at 01228 734162, or send an email to [email protected]. Our team of experts will provide you with a prompt and efficient response to your query. Stay connected with us on our website, drainagecumbria.uk, to know more tips and tricks on how to maintain your macerator toilet and keep it functioning efficiently.

We hope the information provided in this guide has been useful in helping you clear a blocked macerator toilet. Remember, regular maintenance, proper usage, and timely repairs or replacements can keep your macerator toilet in excellent condition, preventing future problems and maintaining hygiene and cleanliness in your bathroom.