What To Do If You Block The Toilet In Cumbria

Are you in Cumbria and facing a blocked toilet situation? Do not panic, Drainage Cumbria is here to help and guide you on what to do in such a situation.

As a blocked toilets company in Cumbria, Drainage Cumbria has a team of experienced professionals who can help you unblock your toilet quickly and efficiently. However, if you prefer to try to fix the blockage yourself, we have compiled a guide on what to do in this case.

The Toilet

The toilet is an essential part of any household or commercial space. It enables us to dispose of human waste efficiently and safely. Therefore, when a toilet gets blocked, it can quickly turn into a problematic situation.

If you notice that your toilet is not flushing correctly, the water level in the bowl is high, or remains high, this signifies a blockage. The first sign is usually when nothing goes down after you flush.

The Plunger

The most common solution to a blocked toilet is a plunger. A plunger is a rubber cup that fits over the toilet bowl's drain hole and creates a vacuum that dislodges the blockage.

To use a plunger:

1. Push the plunger into the toilet bowl, making sure it covers the whole drain hole.

2. Pull the plunger up and down vigorously to create a vacuum. This motion will push and pull water in the bowl, which helps dislodge the blockage.

3. Start with soft movements. Forceful plunging from the get-go may not help and could even make things worse.

4. Repeat the process several times until the toilet water drains quickly and effortlessly.

If you don't have a plunger at hand, you can try a DIY version by using a plastic bag. Wear gloves and carefully apply the bag over the toilet's drain hole, creating a vacuum with the same motions as you would use with a plunger.

The Auger

If the plunger does not work, there is another tool you can try. A toilet auger, also known as a plumbing snake, is a tool that reaches further into the pipe to unclog the blockage. You can buy or rent one at your local hardware store.

To use an auger:

1. Insert the auger into the toilet bowl, keeping the handle up and over the toilet.

2. Push the cable of the auger into the drain.

3. Twist the handle of the auger while applying pressure. This will allow the cable to move further down the drain.

4. Pull the cable out while flushing the toilet. This will help to clear the blockage.

5. Repeat the process until the water drains quickly and effortlessly.

Water's One-Way Flow

Water flows in one direction in a toilet: from the tank into the bowl and down the drain. When it gets blocked, the water cannot flow in the preferred direction, and this leads to a blocked toilet.

Flushing a toilet that has a blocked drain can cause the water level to rise, leading to an overflow. This overflow can trigger sanitary concerns and, if not cleaned correctly, could cause potential health risks.

YourRepair

If you have tried all these methods and the blockage persists, you may need professional help to remove the blockage. YourRepair is a fast and friendly plumbing and drainage service that can assist in clearing any blockages.

Don't Use Excessive Water

When you have a blocked toilet, remember not to use excessive water to try and flush the blockage away. This can cause more damage and potentially make the blockage more severe.

Water Could Increase the Blockage

Using water to flush and loosen the blockage may seem like a good idea. However, it could increase the water volume and make it more difficult to remove the blockage.

Start with the Toilet Bowl

Always start by checking the toilet bowl for obstructions before moving on to the pipes under the toilet. In most cases, the blockage will be in the bowl and can be removed using plunger or auger.

Pull and Push

When using a plunger, always remember to pull and push it slowly and gently. Abrupt, hard movements could make the blockage more severe and even cause damage to the pipes.

The Pipe Under the Toilet

If the blockage is in the pipe under the toilet, you need to know what you are doing before attempting to remove it. It's generally best to leave this to professional plumbers who have the right tools and experience as DIY plumbing could damage the pipe.

Conclusion

In summary, a blocked toilet in Cumbria can cause a significant inconvenience and potential health risk. If you are facing this problem, the first step you should take is to remain calm and follow our guide.

Attempt the easy fixes like plunging or using a DIY plunger, and if that fails, move on to the auger. Should this fail, YourRepair is an excellent, fast, and reliable plumbing and drainage service to turn to.

Remember, attempting complex plumbing fixes by yourself could lead to additional damage and may require expensive repairs. Therefore, it's always best to call in a professional service, like Drainage Cumbria, to take care of the problem.

So, if you have a blocked toilet issue in Cumbria, call Drainage Cumbria, the blocked toilet company, at 01228 734162 or visit our website at drainagecumbria.uk. Our email contact is [email protected].