What To Do When You Block The Toilet In Cumbria

Are you experiencing a blocked toilet in Cumbria, North West England? Don't panic! This is a common problem that can be fixed with the right tools and techniques. Here at Drainage Cumbria, we provide a reliable and efficient service for unblocking toilets. However, if you prefer to do it yourself, here are some tips to unblock your toilet.

Causes of toilet blockage

Before we discuss the methods of unblocking a toilet, let's first identify the common causes of a blocked toilet. The most common cause is flushing large amounts of toilet paper. Other causes can include flushing non-degradable items such as sanitary towels, wipes, or toys. Another reason can be insufficient water in the toilet tank, causing the toilet to clog.

Tools for unblocking a toilet

The basic tools you need to unblock a toilet are a plunger, a wire coat hanger, and hot water. A plunger is a rubber suction cup with a wooden handle that is used to create a seal around the toilet bowl. A wire coat hanger can be used to dislodge the blockage if it is close to the surface of the toilet bowl. Hot water can be used to dissolve and loosen the blockage.

Method 1 - Plunger

Step 1 - Remove excess water

Before using a plunger, remove any excess water from the toilet bowl using a small container or a mop.

Step 2 - Position the plunger

Place the plunger over the toilet bowl drain and ensure that it creates a seal around the bowl.

Step 3 - Pump the plunger

Pump the plunger up and down with firm pressure to create suction and dislodge the blockage.

Step 4 - Flush the toilet

After several plunges, flush the toilet to see if the blockage has cleared. Repeat the process if necessary.

Method 2 - Wire coat hanger

Step 1 - Straighten the wire coat hanger

Straighten out the wire coat hanger so that it can be inserted into the toilet bowl.

Step 2 - Insert the wire coat hanger

Insert the wire coat hanger into the toilet bowl and use it to dislodge the blockage. Be careful not to scratch the toilet bowl.

Step 3 - Remove the wire coat hanger

Remove the wire coat hanger from the toilet bowl and flush the toilet to see if the blockage has cleared.

Method 3 - Hot water

Step 1 - Heat water

Heat a pot of water until it is very hot but not boiling.

Step 2 - Pour the hot water

Pour the hot water into the toilet bowl and wait for a few minutes for the hot water to dissolve and loosen the blockage.

Step 3 - Flush the toilet

Flush the toilet to see if the blockage has cleared. Repeat the process if necessary.

Using a Toilet Auger

If the blockage is located deep in the drainpipe, a toilet auger may be needed to clear it. A toilet auger is a long flexible wire with a handle that can be inserted into the toilet bowl to clear the blockage.

Prevention of toilet blockages

Prevention is always better than cure. Here are some tips to prevent future toilet blockages:

• Do not flush large amounts of toilet paper.
• Do not flush non-degradable items such as sanitary towels, wipes, or toys.
• Use a toilet bowl cleaner to prevent buildup of sediment and waste.
• Ensure that there is enough water in the toilet tank to create a strong flush.

Contacting Drainage Cumbria

If you are unsuccessful in unblocking your toilet, contact us at Drainage Cumbria. We are a blocked toilets company in Cumbria, providing a reliable and efficient service to unblock your toilet. Our phone number is 01228 734162 and our email is [email protected]. You can also visit our website at drainagecumbria.uk to schedule a service with us.

Conclusion

Unblocking a toilet can be a messy and unpleasant task, but it is something that has to be done. With the help of a plunger, a wire coat hanger, and hot water, you can unblock your toilet quickly and easily. Prevention is always better than cure, so make sure to follow the tips to prevent future toilet blockages. If you need assistance or prefer to have the job done by a professional, contact us at Drainage Cumbria. We are always happy to help.