We provide the best Drainage Services in the Cumbria
We are here for all you Drainage Service needs in Cumbria.
If you're experiencing issues with your Samsung front load washer, it could be due to a blocked drain hose. When the drain hose is clogged, water cannot flow freely, causing your washer to malfunction. In this article, we'll discuss how to clean the drain hose on a Samsung front load washer in Cumbria.
At Drainage Cumbria, we are a drain cleaning company based in Cumbria, North West England. Our team has decades of experience in dealing with all kinds of drainage issues, including clogged drain hoses in washing machines. We understand the frustration you may feel when your washer is not working correctly, and we're here to help.
Before we dive into the cleaning process, it's essential to understand the drainage system of a Samsung front load washer. The washer's drain pump helps remove water from the drum during the wash cycle and sends it out through the drain hose. The drain hose is a long, flexible pipe that attaches to the back of the washer and leads to either a standpipe or a sink.
When the drain hose is blocked, water cannot flow freely, causing it to back up and result in an error code on your washer's display. The most common error codes related to a blocked drain hose are "5E" or "ND."
Here are some of the signs that indicate your drain hose is blocked:
If you notice any of these signs, it's time to clean the drain hose.
Here are the steps you can follow to clean the drain hose on your Samsung front load washer:
Before starting the cleaning process, ensure that the power supply to the washer is switched off. This is to prevent any electrical hazards while you're working on the machine.
Once the power is turned off, locate the drain hose at the back of the washer. It is usually a thin, flexible pipe that connects to the pump, which is responsible for removing water from the drum.
To clean the drain hose thoroughly, you'll need to remove it from the pump. You can do this by unscrewing the clamp or clip that holds it in place. Be prepared to catch any water that may spill out of the hose as you disconnect it.
After removing the hose, check for any blockages. You may find lint, foreign objects, or even soap residue that is blocking the hose. If you notice blockages, clear them using a cable or a long, thin object that can fit through the hose.
Once you've cleared the blockages, clean the hose thoroughly with warm water and a mild detergent. Use a brush or a cloth to scrub the hose's interior to remove any remaining debris.
After cleaning the hose, reconnect it to the pump and tighten the clamp or clip. Make sure that the hose is securely attached and properly seals the connection with the pump.
Now that you've cleaned and reconnected the drain hose, turn the power back on and run a cycle to test the washer. Check to see if the water drains correctly and if there are any error codes displayed on the machine's panel.
Some Samsung front load washers have a failsafe drain. When the machine detects an issue with the drain pump or hose, it activates the failsafe drain. This means that the washer drains itself automatically to prevent water from spilling onto the floor. In this case, you will need to unplug the washer and allow the machine to drain completely before you can clean the drain hose.
Cleaning the drain hose is an essential part of maintaining your Samsung front load washer. To prevent blockages from occurring in the future, make sure to clean the drain hose regularly, at least once every six months. Additionally, check the hose for any signs of wear or damage, such as cracks or holes, and replace it if necessary.
Cleaning the drain hose on your Samsung front load washer may seem daunting, but it is a relatively simple task that can save you from costly repairs. By following the steps above, you can clear any blockages and get your washer back to running smoothly. For all your drainage needs in Cumbria, give us a call at Drainage Cumbria on 01228 734162, or visit our website at drainagecumbria.uk.