Do you live in Cumbria, North West England and are you having problems with your washing machine? Does it not empty properly or is the drainage slow? Maybe it wont even start at all? If so, Drainage Cumbria are here to help. As a trusted and reliable drain cleaning company in Cumbria, we know how to fix the common problems that arise with washing machines, and one such issue is the drain pump.
The drain pump is a vital part of the washing machines drainage system, and it helps to expel dirty water from your machine during the various cycles. Over time, the pump may become clogged with debris, dirt, and even clothing fibres, which can lead to problems with drainage. In this article, we will show you how to clean the drain pump on your washing machine in Cumbria.
If you are experiencing a problem with drainage on your washing machine, the first sign of a clogged drain pump is usually a slow or incomplete drainage of the machine. This can cause the water to back up and even overflow from your machine if not dealt with promptly. Additionally, if your washing machine refuses to start or stops mid-cycle, it may be due to a blockage in the drain pump.
Before beginning any maintenance on your washing machine, it is important to turn off the machine and unplug it from the power source.
After you have turned off the machine, you must empty it of any water that may be left in the drum. This can be done by selecting the empty programme on your machine or by manually emptying the drum using a container.
Once the machine is empty, you must gain access to the pump filter, which is usually located at the bottom of the machine, near the front hatch. Depending on your make and model, there may be a small cover or hatch that can be removed to access the pump filter, or you may need to remove the front panel of the machine entirely.
Once you have access to the pump filter, you can remove it by unscrewing the cap or pulling it out using the handle. Be warned that there may be a small amount of water that will be released from the machine, so have a container on hand.
With the pump filter now removed, you must clean it thoroughly, removing any debris or dirt that may have accumulated inside. You can use a small brush or a cloth to clean the filter, and be sure to check inside the pump cavity as well for any blockages.
Once the pump filter is clean, you can reattach it to the machine, screwing the cap back on or reinserting it back into the machine. Be sure to tighten it securely.
You can now check the drain hose for any blockages or kinks. Run water through the hose to ensure that it flows freely and is not obstructed in any way.
Now that the drain pump is cleaned and the drain hose is checked, you can test the machine to ensure that it is working correctly. Turn the power back on and start a wash cycle to check if the problem has been resolved.
At Drainage Cumbria, we understand the importance of a properly functioning washing machine. Our team of experienced technicians can help diagnose and fix any issues you may have with your machine, including problems with the drain pump. Our unbiased and independent reviews exist to help our readers make an informed decision about whom to trust with their washing machine repairs.
We know that washing machine problems can be frustrating, so we offer a fast and reliable service to our customers. Call us on 01228 734162 and we will help you diagnose the problem over the phone, or we can schedule an appointment for one of our experienced technicians to come and fix your machine.
If you are experiencing a problem with your washing machine drainage, it may be due to a clogged drain pump. At Drainage Cumbria, we are a trusted drain cleaning company in Cumbria, and we know how to fix common problems with washing machines. By following the simple steps outlined above, you can easily clean the drain pump on your washing machine, helping to keep it functioning correctly. Give us a call on 01228 734162 for more help or to schedule a repair appointment.