How to Clean the Drain Pump on My Washing Machine in Cumbria

If you live in Cumbria, in the North West of England, chances are you will have experienced problems with your washing machine's drainage system. This can cause a lot of frustration and even lead to costly repairs if not addressed promptly. Drainage Cumbria are a drain cleaning company in Cumbria who can help with this problem. In this guide, we will explain how to clean the drain pump on your washing machine, a common cause of drainage issues.

Checking If Your Washing Machine Won't Drain

Before you start cleaning the drain pump, you should make sure that the issue is not something else. If your washing machine won't drain, you can check the following:

• Is the drain hose blocked? Take the hose out of the drain and check for any obstructions.
• Is the washing machine overloaded? Make sure you are not trying to wash too many clothes at once.
• Is the drain pump filter dirty? If the filter is clogged, water won't flow properly.

Once you have ruled out these possibilities, you can move on to cleaning the drain pump.

Preparing for Drain Pump Cleaning

To begin cleaning the drain pump on your washing machine, you will need a few things:

• A bucket to catch any water that comes out of the machine
• Towels to soak up any spills
• A drain hose or a vent to help drain water
• A screwdriver

Make sure you have enough space in your laundry room to access the panel somewhere on your washing machine that covers the pump.

Finding the Drain Pump And Removing The Filter

The drain pump is usually located at the bottom of the washing machine's tub, behind the front panel. This panel can be removed by unscrewing the screws that hold it in place using a screwdriver.

Once you have made sure the power to your washing machine is off, carefully remove the filter from the drain pump. It is normal for some water to come out when you remove the filter, and this is why you need a bucket and towels to absorb any spills.

Cleaning the Filter and the Pump

Now that you have removed the filter, clean it thoroughly by rinsing it under running water or use a soft brush to free any buildup. After this, give the filter and the pump itself a thorough cleaning by wiping them down with a damp cloth.

You should take care not to damage the filter or the pump while cleaning them. It's also important to note that if you see anything nasty or unpleasant during cleaning, you should use gloves to protect your hands.

Checking the Pump for Debris

While you have the filter off, you should also check for any debris that might have gotten past. This can include small pieces of clothing, coins, or even pet hair. Use a flashlight to peer inside the tub to make sure it is free of debris. If you find any, remove it using your fingers or a pair of pliers.

Replacing the Filter and the Panel

After you have finished cleaning the filter and pump, replace the filter back into the drain pump. Make sure you screw it back in securely with the screwdriver.

Then, put the front panel back on and screw it in tightly as well. Once you have confirmed that everything is tightly secured, plug in the washing machine and turn it on to see if the problem is resolved.

Preventing Future Drainage Issues

Cleaning the drain pump on your washing machine is a task that should be done regularly, especially if you live in an area where hard water is common. Hard water can lead to mineral buildup, which can cause blockages.

To prevent future drainage issues, you should consider using a descaler on a regular basis to help prevent buildup. Also, be sure to only use the recommended amount of laundry detergent, as excess detergent can also cause blockages.

Conclusion

In conclusion, cleaning the drain pump on your washing machine is a task that should be done regularly to prevent drainage problems. Drainage Cumbria are a drain cleaning company in Cumbria that can help with your drainage problems. Remember to turn off your washing machine's power and have the necessary tools, such as a bucket and towels, to do the job. Be sure to clean the filter and pump thoroughly, and check for debris while you are at it. Finally, don't forget to take steps to prevent future blockages. Follow our guide, and you'll be able to keep your washing machine in good working order for years to come!