How to clean washing machine drain pump in Cumbria

Are you having problems with your washing machine not draining properly? It could be because of a clogged drain pump. At Drainage Cumbria, we are a drain cleaning company in Cumbria that can help you with this issue. In this article, we will guide you on how to clean a washing machine drain pump in Cumbria.

The basics of washing machine drainage

First, we need to understand how a washing machine drains. When you start a cycle, the water fills up the tub and then it drains out through a hose. The hose is connected to a pump that forces the water out into a drain or a sink.

Over time, the pump may become clogged with lint, coins or other debris. This can cause the water to drain slowly or not at all. To avoid this problem, you need to clean the drain pump regularly.

Signs that your washing machine drain pump needs cleaning

• Water is not draining from the machine properly
• A foul smell is coming from the machine
• The machine is vibrating abnormally during the drain cycle
• The machine is making unusual noises during the drain cycle

If you notice any of these symptoms with your washing machine, it is time to clean the drain pump.

Steps to clean the washing machine drain pump

Step 1: Preparation

To start with, you will need to gather the following materials:

• A bucket
• A towel
• Needle-nose pliers or tweezers
• A drain cleaning tool
• A container to collect information
• Independent advice

Step 2: Turn off the power and water supply

Before starting to clean the drain pump, turn off the power and the water supply to the machine. This is important for your safety and to prevent any damage to the machine.

Step 3: Locate the pump and drain filter

The pump is located at the bottom of the machine, usually at the front. The drain filter is also located in the same area, and it may be marked with a label.

Step 4: Collect any water that may be remaining in the machine

To avoid a mess, it is important to collect any water that may be remaining in the machine before opening the drain filter. Place a towel under the machine and then remove the filter cap.

Step 5: Clean the filter

Once the filter is removed, clean it thoroughly using the drain cleaning tool. Make sure to remove any lint or debris that may be clogging the filter. You may also use a toothbrush or a soft-bristled brush to scrub the filter.

Step 6: Clean the drain pump

With the filter removed, you can now access the drain pump. Use your needle-nose pliers or tweezers to remove any debris that may be clogging the pump. Make sure to clean the pump thoroughly.

Step 7: Reassemble the drain filter and pump

Once you have cleaned both the filter and the pump, reassemble them in the same order that you removed them. Make sure that the filter cap is secured tightly.

Step 8: Test the machine

Turn the water supply and power back on and start the machine to test if it is working properly. If you notice any problems, turn off the machine and check the drain pump again.

Tips for maintaining your washing machine

• Do not overload the machine
• Use the correct amount of detergent and fabric softener
• Leave the door or lid open after a cycle to air out the machine
• Clean the filter and pump regularly

Why choose Drainage Cumbria?

At Drainage Cumbria, we are an independent advice agency that provides advice to visitors in North West England. Our company specializes in drain cleaning, and we have been providing this service since 2004. We are dedicated to providing the best service to our customers, and we use the latest equipment and techniques to ensure that the job is done right.

Contact us

If you need help with cleaning your washing machine drain pump in Cumbria, contact us at Drainage Cumbria. You can reach us by phone at 01228 734162 or via email at [email protected]. You can also visit our website at drainagecumbria.uk for more information about our services. Give us a call today for a thorough washing machine clean out, and no laundry messes!