How To Remove Bathtub Plug To Clean Drain In Cumbria

Are you struggling to clean the drain in your bathtub due to a stuck bathtub plug? We at Drainage Cumbria can help you remove the plug and clean the drain, ensuring that your bathtub is functioning smoothly once again. In this guide, we will be discussing how to remove the bathtub plug to clean the drain in Cumbria.

Identifying the Type of Bathtub Plug

The first step is to identify the type of bathtub plug that you are dealing with. There are typically two types of bathtub plugs - knob and stopper.

Knob

A knob bathtub plug can be easily identified as a knob that is located on the overflow drain of your bathtub. When the knob is turned, it will lift up the stopper that is located at the bottom of the drain.

Stopper

A stopper bathtub plug is a bit more complicated. It can be identified as a stopper that is located at the bottom of the drain. This stopper can be either a top stopper or a lift-and-turn stopper.

Top Stopper

A top stopper can be identified as a stopper that is located at the top of the drain. It can be easily removed by pulling it straight up.

Lift-and-Turn Stopper

A lift-and-turn stopper can be identified as a stopper that is located at the bottom of the drain. It can be removed by lifting it and then turning it in a counterclockwise direction.

Removing the Bathtub Plug

Now that you have identified the type of bathtub plug that you are dealing with, it's time to remove it. Here's how to remove the bathtub plug based on the type of plug you have.

Knob

To remove a knob bathtub plug, simply turn the knob in a counterclockwise direction. This will lift up the stopper at the bottom of the drain, allowing water to flow out.

Top Stopper

To remove a top stopper bathtub plug, simply pull it straight up. This will release the stopper, allowing water to flow out.

Lift-and-Turn Stopper

To remove a lift-and-turn stopper bathtub plug, first, lift the stopper as high as it will go. Then, turn it in a counterclockwise direction until it is released from the drain.

Cleaning the Drain

With the bathtub plug removed, it's time to clean the drain. Here's how to clean the drain in your bathtub.

Using Pliers

To remove any debris or hair that may be caught in the drain, use a pair of pliers. Simply reach down into the drain and pull out any debris that you find.

Using a Basket

If you don't have pliers, you can use a basket instead. Simply place the basket over the drain and push down to create a suction. This will pull out any debris that is caught in the drain.

Replacing the Bathtub Plug

Now that you have cleaned the drain, it's time to replace the bathtub plug. Here's how to replace the bathtub plug based on the type of plug you have.

Knob

To replace a knob bathtub plug, simply turn the knob in a clockwise direction. This will lower the stopper back into the drain, allowing you to fill the bathtub with water.

Top Stopper

To replace a top stopper bathtub plug, simply place the stopper back in the drain and push down on it until it clicks into place.

Lift-and-Turn Stopper

To replace a lift-and-turn stopper bathtub plug, first, lift the stopper as high as it will go. Then, turn it in a clockwise direction until it is firmly back in place.

Operating the Bathtub Drain Stopper Properly

In order to know how to remove the bathtub plug to clean the drain in Cumbria, it's important to know how to operate the drain stopper properly. Here's how to operate the bathtub drain stopper properly.

Fill Water First

Before operating the drain stopper, make sure to fill the bathtub with water first. This will ensure that the stopper is in the proper position.

Identify the Type of Bathtub Plug

Before operating the drain stopper, it's important to identify the type of bathtub plug that you are dealing with.

First Identify How to Remove

Once you have identified the type of plug, make sure to first identify how to remove it properly.

First Remove and then Clean

Once the bathtub plug is removed, you can clean the drain properly.

Fill with Water and Replace

After cleaning the drain, fill the bathtub with water, and replace the bathtub plug in its proper position.

Conclusion

In conclusion, removing a bathtub plug to clean the drain in Cumbria is not as difficult as it may seem. By identifying the type of bathtub plug that you are dealing with and following the steps outlined in this guide, you will be able to remove the bathtub plug, clean the drain, and replace the plug in no time. If you need any further assistance with your drain cleaning needs, feel free to give us a call at Drainage Cumbria on 01228 734162 or visit our website at drainagecumbria.uk.