Call Drainage Cumbria Anytime for Top Quality, Great Value Drainage Solutions on 01228 734162

We are here for all you Drainage Service needs in Cumbria.

How To Repair A Shower Drain In Cumbria

Are you experiencing a leaky shower drain in Cumbria? Don't worry; you can fix it yourself in a few easy steps. In this guide, we will go through how to repair a shower drain step-by-step so you can hopefully fix the problem without calling in an expert. Drainage Cumbria is a drain repairs company in Cumbria that offers repairs on a variety of drainage problems, including shower drains. However, if you feel unsure or uncomfortable with doing the repair yourself, contact us, and we will be glad to help.

What is a shower drain?

The shower drain is the part of the shower that collects the water that flows off the body, tub, and walls. It is essential to have a working shower drain to prevent water damage to the floor, walls or ceiling.

How to repair a shower drain

Tools needed:

  • Hacksaw
  • Drainpipe
  • Putty
  • Putty knife

Step 1: Remove the drain flange

The first step is to remove the drain flange, which is the visible part of the shower drain. You can do this by unscrewing the screws that attached the flange to the drain body. If you can't find any screws, use a hacksaw to cut through the flange carefully.

Step 2: Remove the drain body

After removing the flange, the next step is to remove the drain body from the shower. To do this, locate the drainpipe that is connected to the drain body from beneath the shower. Use a hacksaw to cut the drainpipe.

Step 3: Cut a new drain body

Now, using the old drain body as a sample, cut a new drain body that fits the size and shape of the old one.

Step 4: Install the new drain body

Place the new drain body in the shower, ensuring that it is correctly aligned. Use a special adhesive or putty to seal the joint between the new drain body and the shower drain. Leave the putty to dry.

Step 5: Place the drain flange

Once the putty has dried, place the drain flange back onto the drain body. Use a screwdriver to screw the flange into place.

Step 6: Test the shower drain for leaks

Turn the water on and let it run for a few minutes. Check the drain for any leaks. If you find any leaks, tighten the drain flange screws or apply more putty around the joint between the drain body and the shower.

Step 7: Tidy up

Once you are satisfied that the leak is fixed, tidy up the area around the shower. Dispose of any old drain pipes and flanges safely.

Conclusion

Repairing a shower drain in Cumbria is not a difficult task, provided you have the right tools and a bit of DIY experience. However, If you feel unsure, Drainage Cumbria is here to help. We are a drain repairs company in Cumbria that offers a variety of drainage repair services. Contact us on 01228 734162 or email us at [email protected] if you require any assistance.

We hope this guide has been helpful, and we wish you good luck in repairing your shower drain. Don't hesitate to contact us if you need us.

Drain Repairs Related Questions