Call Drainage Cumbria Anytime for Top Quality, Great Value Drainage Solutions on 01228 734162

We are here for all you Drainage Service needs in Cumbria.

How To Repair Sink Drain In Cumbria

When it comes to plumbing issues, a clogged sink drain ranks among the most frustrating. Not only does it prevent you from using the sink, but it can also lead to foul odours in your kitchen or bathroom. Fortunately, repairing a sink drain is a straightforward task that you can complete with just a few tools and supplies. In this article, we will walk you through how to repair a sink drain in Cumbria, and give you some tips on how to prevent clogs from happening in the first place.

Who We Are

Drainage Cumbria are a drain repairs company based in Cumbria, North West England. We have been providing a wide range of drainage services for over a decade, including drain cleaning, CCTV surveys, and drain repairs. Our team of experienced engineers are available 24/7 to help you with any drainage issues you may have. If you need help with your sink drain, give us a call at 01228 734162 or email us at [email protected].

Cut Off The Supply and Nut Fittings

Before you start repairing your sink drain, you will need to shut off the water supply to the sink. This can usually be done by turning off the knobs under the sink. Next, you will need to remove the nut that connects the sink to the drain pipe. You will need a wrench for this job. Turn the nut counterclockwise to loosen and detach it from the pipe.

Clear The Area

Once youve removed the sink nut, you will need to clear the area around the drain. This includes any items that may be blocking your access to the drain, such as dishes or cleaning supplies. Make sure the area is clean and dry to avoid any accidents while working on the drain.

Remove The Sink Nut

Next, you will need to remove the sink nut that connects the drain to the sink basin. This can be done using a sink nut wrench, which is specifically designed for this job. If you dont have a sink nut wrench, you can use a pair of pliers or a wrench, but be careful not to damage the nut or the sink. You will need to hold the drain in place with one hand while you rotate the nut with the other.

Use The Spin Fit

If the sink nut is too tight to remove by hand, you can use a spin fit to loosen it. A spin fit is a tool that attaches to a rotary tool and spins the nut in the opposite direction, making it easier to remove. You will need to use a cutting bit to create a groove in the nut before using the spin fit.

Smack The Nut Off

If the spin fit still doesnt work, you can try smacking the nut off using a hammer and chisel. This should only be done as a last resort, as it can damage the sink or the drain.

Remove The Drain

Once youve removed the sink nut, you should be able to pull the drain out of the sink basin. This may require some wiggling or prying. If the drain is still stuck, you may need to use a plunger or a drain snake to loosen it.

Clean The Drain

Once youve removed the drain, you should clean it thoroughly to remove any debris or clogs. You can do this by using a drain brush or by flushing it with hot water. Avoid using harsh chemicals, as this can damage the drain.

Reinstall The Drain

Once the drain is clean, you can reinstall it by following the steps above in reverse order. Make sure the nut is tight enough to prevent leaks, but not so tight that it damages the sink or the drain.

Tips To Prevent Clogs

Preventing clogs in the first place is the best way to avoid having to repair your sink drain. Here are a few tips to help keep your drains flowing smoothly:

  1. Use a drain strainer to catch any food scraps or debris that may go down the sink.

  2. Avoid pouring grease, oil, or fat down the drain.

  3. Run hot water down the drain after each use to help flush any debris.

  4. Use a vinegar and baking soda solution to clean your drains and prevent clogs.


Repairing a sink drain is a straightforward task that can be done with just a few tools and supplies. If youre not comfortable doing it yourself, or if you encounter any issues, dont hesitate to call Drainage Cumbria at 01228 734162. Our experienced engineers are available 24/7 to help you with any drainage issues you may have. Don't forget to visit our website at for more information on our services.

Drain Repairs Related Questions